Native Instruments had a bit of a sleeper hit with Maschine. It
started off slowly but in the two and a half years since its release
it’s managed to cause quite a stir. Now, Maschine Mikro is the new kid
on the block; is a cut down version of the beat making machine a DJs
dream?
SPECS
- Width: 320 mm / 12.6″
- Length: 195 mm / 7.7″
- Height: 55 mm / 2.2″
- 1.2 Kgs / 2.6 lbs
- Black and white display 64 x 128 pxs
- 16 illuminated pads with velocity and aftertouch
- One master knob
- 28 backlit buttons
- USB 2.0
THE GOOD
- Sturdy build
- Excellent software
- Sensitive pads
THE BAD
- Absence of knobs and faders
- Price
THE BOTTOM LINE
If you use Mikro as a groove box and integrate it into your set that
way, then it’s great value providing you have the horsepower to run the
Maschine software alongside your DJ software of choice. If you’re just
planning to use it as a MIDI controller, it’s a bit of a waste of money.
TO GROOVE OR NOT TO GROOVE?
There’s a very important point regarding Maschine: it’s not a
controller, it’s an ‘integrated solution’ in that it’s a software groove
box with a bespoke piece of controller hardware. It’s not too
surprising, then, that the pure DJs and controllerists amongst you
haven’t really jumped on the ‘full fat’ Maschine seeing as it costs
twice as much as a pad or button controller that can do just as much if
not more with your DJ software.
Regardless of what some people would have you believe, it’s not a
prerequisite to make music to call yourself a DJ. Music production and
DJing are two very different skillsets – albeit with some overlapping
qualities – but that’s not to say that a groove box should be outside
the realms of the DJ booth, so let’s take a look at how Maschine Mikro
fits into the DJing paradigm…
BUILD
Mikro is a sturdy little piece of kit, with a metal faceplate and
good quality plastic bodywork. If you’re precious about keeping your
equipment pristine then it’s probably a good idea to invest in carry
cases and maybe even an overlay, though, because the black topcoat on
the faceplate scratches quite easily to reveal the metal underneath.
The menu and function buttons on Mikro are squidgy and don’t click
when they’re pressed; they’re not the best buttons for assigning to
things you want to go nuts on, but their slight springiness means
they’re not the worst either. The pads, on the other hand, feel great.
They’re velocity and pressure sensitive, and sensitivity is constant
across most of the pad. At the very corners of the pads there’s a
tendency for them shift in the housing rather than trigger, but they’re
large enough that that’s not really an issue. The pads don’t depress
much, and the rubber’s very firm so there’s not much bounce – just
enough to be kind to the pads of your fingers whilst rocking out a heavy
handed cue juggle. The sensitivity is such that when set to max, poly
pressure is actually triggered with a hair’s touch, and note on takes
just a little bit more to register. This is probably a ‘safety’ feature
incorporated by NI as you can literally trigger poly pressure messages
on other pads when your shirt sleeve (in my case comfortable cardigan)
touches them whilst pressing another.
Mikro’s solitary rotary encoder doubles as a push button. To those of
you who’ve used NI’s Kontrol X1: more of the same. Those that haven’t:
it’s got about 20 clicks per turn, feels just right, looseness wise, and
the button press sits just right between being too easy to accidentally
press and being tough to get when you actually want it.
GROOVE BOX
The Maschine software itself has become incrementally better featured
in its two and a half year time on the market. It started out as a
simple, closed off groove box and now it’s happy to play with other
software by syncing MIDI signals, using plugins, sending multiple outs,
even being a plugin itself while it does it. If you use something like
Ableton Live or Torq to DJ then you’ll be able to drop Maschine in to
your rig as a plugin, or if you’re a Traktor user then you’ll have to
sync the software behind the scenes. Once that’s done, though, you’ll be
able to trigger loops, samples, and effects in perfect time with your
host with way more power than, for instance, Traktor’s sample decks.
The Maschine software (at 1.7 at the time of this review) has so many features, some of which aren’t
that relevant
to DJ use, that going through them all would take an age and wouldn’t
really leave you any better informed as to whether or not it’s got a
place in your setup. That in mind, here’s a list of the killer features
that make Maschine potentially great for DJs:
- 128 sample pads. The eight groups of 16 pads means
you have a huge 128 samples available, and every one of those samples
can be played at any pitch – with a couple of button presses turning the
pads into pitch mode – and have its own effects applied to it.
Considering they’re also velocity and aftertouch sensitive, there’s a
lot of creative possibility.
- Loop slicing. If you want to import a loop but also
want the ability to get creative with it, Maschine has built in slicing
to allow you to chop up that loop and place it on the pads
automatically. Use a group to get each pad playing an 8th note of a two bar loop and go nuts!
- Sequencing. Maschine is a sequencer at heart, so
when you’ve loaded in a bunch of samples – be they drums or a chopped
loop – you can program in your own loops to trigger and blend with your
decks, and easily switch between patterns on the fly.
- Step editing. One of the best looking features of
Maschine is its step edit mode. As a pattern plays, the pads become a
representation of the 16ths in a bar and will light up in a
cycle depending on where the playhead is, as well as showing where hits
for each sample lie in the pattern. You can use this to please the crowd
as well as as a fun way to edit loops on the fly.
- Huge library. Maschine comes with over 6GB of
sounds to play with, which equals a massive amount of preset kits and
every single kit has at least one pattern; just load up a kit you like
and go!
- Great effects. The effects in Maschine are designed
to be used in real time, and they all sound great; they’re more
flexible than Traktor’s and there’s space for three per sample, another
four on top for each group, and four on the master as well.
You can also load in VST/AU effects and instruments to Maschine, send
16 separate outputs, and a whole lot more besides. All this
functionality does come at a cost, though, and much like software like
Ableton Live or perhaps Torq, whose more open nature means that there’s
more of a need to test things on a per-project basis, you can’t
guarantee you’ll be able to add things ad-infinitum (and it’s definitely
not a great idea to test out a brand new idea on the night).
MIDI FUNCTIONALITY
Whilst Maschine is 1:1 mapped to its own software, you’re quite
welcome to use it as a MIDI controller too, and switch between modes by
holding Shift and pressing F1.
The Maschine Mikro controller editor is really simple to use. It
allows you to decide whether you’d like to use the group mode of the
pads or have the group button as an assignable button, as well as
allowing you to create at least 40 (I got bored adding them by that
point) different pages for the knob, F1, F2, and F3 buttons that are
switched with the left/right navigation buttons. All the buttons can be
set to hold, toggle, gate, and even incremental directly in the
hardware, and setting up the LED behaviour is simple.
One disappointment with the editor is the way that the blue LEDs
can’t be utilised in MIDI mode. I suspect that only the top eight pads
(the ones used for group selection) have the multi colour LED, but it
would still be nice to have the option to use them.
Whilst you
can use Maschine simply as a MIDI controller, and
it’s great to have the option to do so (especially as you can switch on
the fly), it’d be a really daft idea to buy one just to map to MIDI
software. In doing that, you’re shouldering the development costs and
licence to the entire software side of Maschine that make Mikro cost
more than competitors’ pad/button controllers that have more, or at
least more relevant to DJs, controls. (the Akai MPD32, Korg PadKontrol,
and the DJTT Midi Fighter spring to mind).
FINAL WORD
Maschine can be a dumb controller, provide loops and samples to
augment your DJ set, and even moonlight as a capable music production
tool when you’re away from the decks. The thing is, it’s only really
great value when you want to do ALL these things. It’s good value if you
want to do a couple, and not so great if you only want to use it as a
MIDI controller. It’s definitely better placed to augment a setup than
its big brother though, whose imposing size might not easily find a
place amongst your existing equipment.
A full team of will be heading to NAMM 2011 this week to bring you all the news. A first report will be published thursday and then we will follow that up with our full annual report on Monday.
